Battery failed load test, needs battery replaced. Alternator charging as designed. Low voltage codes stored in multiple modules.
Both high beam headlamp bulbs are blown. Needs high beam headlamp bulbs replaced.
Removed the left front wheel. Removed the left front inner fender liner. Removed the battery and replaced with new. Reinstalled the inner fender liner. Reinstalled the left front wheel and torqued to specification. Performed battery load test, passed. Vehicle starts as designed.
CA Battery Fee
Removed the left side high beam headlamp bulb and replaced with new. Removed the right side high beam headlamp bulb and replaced with new. High beams operate as designed.
Audrey B. gave our service a 5 star review on 2/26/2025
P0440 evap sytem general failure. Purge valve is operating normally. Smoked evap system. ESIM switch is not sealing. Need ESIM assembly
Replaced the ESIM with new. Replaced the ESIM gasket with new. Cleared diagnostic trouble codes. Performed self test, passed. All checks are ok at this time.
Michael D. gave our service a 5 star review on 12/19/2024
Scanned the Powertrain Control Module (PCM) for diagnostic trouble codes and retrieved P0302 – Misfire Cylinder 2. Spark plugs are excessively worn. Ignition coil is not firing Recommend replacing the ignition coils and spark plugs with new.
Removed the engine cover. Removed the ignition coils. Removed the spark plugs and replaced with new. Replaced the ignition coils with new. Reinstalled the engine cover. Cleared the diagnostic trouble codes. Road tested vehicle to verify repairs. All checks are ok at this time.
Eddie V. gave our service a 5 star review on 9/17/2024