Removed the spark plugs and replaced with new. Removed the spark plug wires and replaced with new. Cleared the diagnostic trouble codes. Road tested vehicle to verify repairs. All checks are ok at this time.
Kent S. gave our service a 5 star review on 5/23/2025
Battery is weak. Charged battery and performed load test, failed. Battery is faulty and needs replaced. Also needs battery reset after battery replacement.
Removed the battery and replaced with new. Performed battery reset. Performed battery load test, passed. Vehicle starts as designed.
CA Battery Fee
Duane K. gave our service a 5 star review on 4/21/2025
Change Engine oil and filter Lubed Chassis Perform 35 point inspection
Drained the transmission fluid and refilled with new. Operated transmission to operating temperature and rechecked the fluid level. Adjusted fluid level as necessary. Road tested vehicle. Rechecked for leaks. All checks are ok at this time.
Rachel M. gave our service a 5 star review on 3/17/2025
Recovered 6 Oz Charged 45oz Added dye Pressures are normal 49 degree duct temperature
C2803 brake pressure transducer problem. Cleared code and checked voltage at the sensor. Voltage checked out ok. Sensor is reading normal on scan tool. 7 way plug in bed is working properly 7 way plug by the bumper is not working. Installed a new 7 way plug down by the bumper. Fixed the wiring. Test drove truck and warning message did not return
Tim S. gave our service a 5 star review on 3/7/2025
B1342• Verified battery voltage and ground connections to the ABS module; both are within normal operating range. • Inspected ABS module wiring and connectors for damage, corrosion, or loose connections; all appear in good condition. • No visible issues with fuses or relays related to the ABS system. • Performed a full system scan with no additional codes found. • No voltage spikes or drops detected during operation. Diagnosis & Recommendation: • ABS module is faulty and requires replacement to resolve DTC B1342 and restore proper ABS functionality.
Removed the ABS hydraulic control unit and replaced with new. Removed the wheels and performed brake bleed procedure. Reinstalled the wheels and torqued to specification. Cleared the diagnostic trouble codes. Road tested vehicle to verify repairs. All checks are ok at this time.
John C. gave our service a 5 star review on 2/21/2025
Removed the drive belt. Removed the water pump assembly and replaced with new. Reinstalled the drive belt. Vacuum bled the cooling system with new coolant. Road tested vehicle to verify repairs. All checks are ok at this time.
Performed battery load test, passed.
Wayne B. gave our service a 5 star review on 2/7/2025